You are here:
SKU: 4464NP-8

4464NP-8 – 2 Section with Doors | 8 Pan Capacity

Front-Breathing Self-Contained Compact Salad Top Refrigerators

Versatile, High Performance Units Designed to work in the real world.

Our 4400 series prep tables provide an integrated design solution to your salad, sandwich and other meal preparation needs. Designed to be easy to work from, they provide a compact area where storage and assembly areas are combined to create an efficient production system. Labor productivity is high. Operational costs are low. Food is kept at safe, consistent temperatures, keeping your meal quality high and your food waste costs low.

Description

Refrigeration System
Refrigeration system uses R290 refrigerant, and will maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature.
Exterior Top
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front.
Interior sides
Interior sides are thermoformed ABS plastic with shelves supported on plugs. Interior back is one-piece 22-gauge stainless steel. Interior bottoms are thermofoamed ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Casters
Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).
Drawers
Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20”, 4”-6″ (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6 size pans. Bottom drawer holds one full size 12 x 20″ and three 1/6 size 4″ deep pans. Pans are supplied by others.
Air screen
Patented air screen ensures product stays cold without drying it out.
Front Breathing
All 4400 series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
Stainless steel top, sides and front
Durable, rugged stainless steel sides, top and front
ABS interior
Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable – it won’t dent, chip or corrode and is backed by a limited lifetime warranty
Exterior Sides and Back
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
ACT Control
ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.
Electrical Connections
Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7′ (2.1m) long electrical cord and NEMA 5-15P plug.
Doors
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf.

Additional information

W x D x H

64 13/100" x 31 1/2" x 42 3/25"

Weight

42 lb

Power Output

6 Amps

Power Input Type

Electric

Primary Power Input

115-120 V x 60 Hz x 1 PH

3″ casters, 3.75″ ride height
Back: Stainless steel finish on back
Construction: 16″ wide single tier overshelf (9M models only)
Cover: Flat lift off cover
Exterior Thermometer
Glass doors
Interior lights