Description
| Base Base has a machine compartment, standard on right, with a condensing unit with condensate evaporator and an electrical junction box installed. Machine compartment has a removable louver for access to condensing unit. Blower coil(s) with expansion valve are located behind the door mullions. |
| Refrigeration System Refrigeration system uses HFC-404A refrigerant. Self-contained with condenser coil and condensate evaporator mounted on rear of the cabinet.Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). |
| Legs Unit is mounted on 6.13″ (15.6cm) high adjustable stainless steel legs. |
| Construction Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel. |
| Electrical Electrical connections are 115 volt, 60 Hertz, single phase. Unit is wired with 8’ (2.4m) cord and plug. |
| Base Interior Base interior has a 22-gauge stainless steel back and bottom. Interior ends and door frames to be thermoformed ABS plastic. Base is insulated with 1.5″ (3.8cm) high density foamed in place polyurethane. |
| Doors Door(s) have a thermoformed plastic ABS plastic interior liner and 22gauge stainless steel exterior front. Door(s) have black recessed handle(s)and a snap-in magnetic gasket which is easily replaceable. Unit is furnishedwith (1) epoxy coated wire shelf for each door section. |





