Brochure or Sell Sheet
Owner/Instruction Manual
Specification Sheet
Warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
T5 Blast Chiller/Shock Freezer
ConvoChill by Delfield
| Width x Depth x Height | 311/2"
x 279/16"
x 377/8"
(80.01 cm x 70.01 cm x 96.2 cm) |
| Weight | 275 lb (124.7400 kg) |
| Power Output | 10 Amps |
| Exterior | Cabinet exterior sides, front, door and grill are corrosion resistant stainless steel. |
| Interior | Cabinet interior is corrosion resistant stainless steel. Bottom and side corner surfaces are stamped to provide radius corners and recessed floors. Chrome plated pan racks accommodate up to five 12"ÂÂÂ x 20"ÂÂÂ x 2 1/2"ÂÂÂ deep, full size pans. Pan lip rests in pan slide assembly. Pan slide assembly is easily removable without the use of tools for cleaning. Stainless steel evaporator housing is mounted to the rear of the cabinet and removes for cleaning or evaporator access without the use of tools. |
| Doors | Stainless steel exterior and stainless steel interior door liner. Doors are field reversible with predrilled hinge mounting holes on both sides of the cabinet. Door seals tight to the cabinet with a magnetic door gasket. Gaskets snap into place and is easily removable without the use of tools. Door handle is continuous along the verticle dimension of the door. |
| Refrigeration System | Evaporator and condensing unit are self-contained and standard with the unit. Condensing unit is mounted at the bottom of the cabinet. The evaporator is mounted to the rear of the cabinet interior. Environmentally friendly R404A refrigerant is used. System has the capability of chilling up to 44lbs. of product from 200 F to 38 F in approximately 90 minutes or freezing up to 26lbs. of product from 200 F to 8 F in approximately 240 minutes. A single fan mounted to the front of the evaporator moves air at velocity sufficient to assure rapid, even cooling. System is controlled by an electronic microprocessor control designed for easy operation. Unit is designed to chill or freeze either for a designated time period, programed by the user or by temperature as monitored by a probe placed in the food product. One temperature probe is supplied. Operator has the choice of using a soft chill cycle for chilling delicate product or a hard chill cycle for denser, less delicate product. Evaporator defrost is automatic using a time/temperature terminated system. User also has the option of initiating a defrost cycle manually. Evaporator condensate is eliminated using an energy efficient hot gas system. |
| Electrical | Standard electrical connections are 220-230/60/1. Connection must be hard wired to a junction box. |
| Certifications |
  |
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
Casters
Companion piece to Convotherm by Cleveland
OES 6.10, OEB 6.10, OGS 6.10, OGB 6.10
