SSF/SAF/SMF-G, GH Specification Line

Self-Contained Glass Door Reach-In Freezer

Doors	Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and PVC. Each door has two edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face.
Refrigeration System	All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between -5ºF and 0ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using DelfieldÂÂ’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.
Electrical	Standard electrical on one section units shall be 115V, 60 Hz single phase. A 10' cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Two and three section units shall be 115/208-230 and will require hardwire connections.
Certifications

Single section stainless interior and exterior glass door freezer

Width x Depth x Height	29" x 34" x 811/8" (73.7 cm x 86.4 cm x 206.0 cm)
Weight	440 lb (199.5840 kg)
Power Output	11.5  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant stainless steel. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	12.68 KWh daily
Certifications

Two section stainless interior and exterior glass door freezer

Width x Depth x Height	55" x 34" x 82" (142.2 cm x 86.4 cm x 208.3 cm)
Weight	710 lb (322.0560 kg)
Power Output	10.0  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant stainless steel. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	19.95 KWh daily
Certifications

Three section stainless interior and exterior glass door freezer

Width x Depth x Height	82" x 34" x 82" (210.8 cm x 86.4 cm x 208.3 cm)
Weight	960 lb (435.4560 kg)
Power Output	11.4  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant stainless steel. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	29.07 KWh daily
Certifications

Single section stainless exterior and aluminum interior glass door freezer

Width x Depth x Height	29" x 34" x 811/8" (73.7 cm x 86.4 cm x 206.0 cm)
Weight	440 lb (199.5840 kg)
Power Output	11.5  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	12.68 KWh daily
Certifications

Two section stainless exterior and aluminum interior glass door freezer

Width x Depth x Height	55" x 34" x 82" (142.2 cm x 86.4 cm x 208.3 cm)
Weight	710 lb (322.0560 kg)
Power Output	10.0  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	19.95 KWh daily
Certifications

Three section stainless exterior and aluminum interior glass door freezer

Width x Depth x Height	82" x 34" x 82" (210.8 cm x 86.4 cm x 208.3 cm)
Weight	960 lb (435.4560 kg)
Power Output	11.4  Amps
Exterior	Models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are chrome plated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	29.07 KWh daily
Certifications

Single section stainless front, aluminum exterior and interior glass door freezer

Width x Depth x Height	29" x 34" x 811/8" (73.7 cm x 86.4 cm x 206.0 cm)
Weight	440 lb (199.5840 kg)
Power Output	11.5  Amps
Exterior	Models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	12.68 KWh daily
Certifications

Two section stainless front, aluminum exterior and interior glass door freezer

Width x Depth x Height	55" x 34" x 82" (142.2 cm x 86.4 cm x 208.3 cm)
Weight	710 lb (322.0560 kg)
Power Output	10.0  Amps
Exterior	Models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	19.95 KWh daily
Certifications

Three section stainless front, aluminum exterior and interior glass door freezer

Width x Depth x Height	82" x 34" x 82" (210.8 cm x 86.4 cm x 208.3 cm)
Weight	960 lb (435.4560 kg)
Power Output	11.4  Amps
Interior	Cabinet interior shall be corrosion resistant heavy gauge aluminum. Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Energy Use	29.07 KWh daily
Certifications