Features Delfield's exclusive ABS interior. ABS is extremely durable - it won't dent, chip or corrode and is backed by a limited lifetime warranty
Construction
Stainless steel front, sides and top
Refrigerant
Environmentally friendly R404A refrigerant
Shelves
Four epoxy coated wire shelves standard installed per unit
Handle
Black recessed quick grip handle
Legs
Rugged 6" high heavy duty metal legs
Hinging
Door hinging available on either right or left, right side is standard
Cord
6' cord and plug supplied
Insulation
Foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane cuts energy costs
Please Note : You may require Adobe Acrobat Reader to view these documents.
Technical Specifications
UC4148
Self-Contained Undercounter Freezer
Width x Depth x Height
48"
x 283/8"
x 351/2"
(121.92 cm x 72.07 cm x 90.17 cm)
Weight
236 lb
(107.0496 kg)
Power Output
5.6
Amps
Exterior Top
Exterior top is mad of one-piece, 22-gauge stainless steel with the front edge turned down to form a nosing and the rear edge turned down.
Exterior Bottom
The exterior bottom is made of one-piece of 14-gauge galvanized metal. Exterior ends are 22-gauge stainless steel.
Doors
The doors are made of 22-gauge stainless steel exterior with a thermoformed ABS plastic interior liner. The doors are fully insulated with environmentally friendly Kyoto Protocol, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam to save on energy costs.
Electrical Connections
The electrical connections are 115 volt, 60 hertz, single phase. All units will have a 7' (2.1m) long electrical cord and NEMA 5-15P plug. Cord and plug are located on the rear of the cabinet, 16" (41cm) above the floor, 12"(30cm) from the left side
Legs
Equipment is shipped with loose 6" (15cm) high metal legs with black enamel finish unless mounting is specified on original sales order.
Refrigeration system
The refrigeration system uses only HFC-404A refrigerant. The compressor is 1/3 h.p., with condenser coil and hot gas condensate evaporator mounted on the rear of the cabinet. The evaporator coil and temperature control is mounted on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet will maintain -5ËšF to 0ËšF (2ËšC to 4ËšC) interior cabinet temperature.
Base Interior
Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. ABS interior is backed by a limited lifetime warranty. Cabinet shall have (4) epoxycoated wire shelves installed. Base shall be fully insulated with high-density foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Energy Use
5.15 KWh daily
Certifications
Certifications
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
Warranty
See Downloads for warranty info.
Accessories
Construction
Stainless steel back
Laminate
Plastic laminate on front
Shelf
Additional shelf
Casters
3.5" (8.9cm) diameter casters (recommended for under counter)