Milk Coolers

 
Product Name
Key Product Features
Dimensions
Rating
Downloads
KCM Shelleyglas

KCM Shelleyglas
Mobile Milk Counters

Learn More

  • Exterior Top : is constructed of 14-gauge stainless steel, welded, ground more...and polished into one integral unit. Top is fabricated with square exterior corners. Top has one (KCM-36), two (KCM-50), three (KCM-60) or four (KCM-74) die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
  • Casters : Units are mounted on 5" (12.7cm) diameter swivel casters wi more...th non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
  • Refrigerated Compartment : have water-tight inner liner constructed of 22-gauge stainl more...ess steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Compartment is equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated compartment is equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 36"
Depth : 30"
Height : 36"
Weight : 400 lb
 
Enerlogic

Specification Sheet
DSKCM

MF Shelleymatic

MF Shelleymatic
Built-in remote milk or beverage dispensers

Learn More

  • Inner Liner : Inner liner shall be water tight and constructed of 22-gaug more...e stainless steel with a 1.00" (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip.
  • Lid : Each opening shall have an insulated, stainless steel foldi more...ng lid with aluminum liner, molded rubber edge and black plastic handles.
  • Self Leveling : Each self-leveling mechanism shall be field adjustable by a more...dding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.
Width : 291/4"
Depth : 261/4"
Height : 28"
Weight : 240 lb
 
 

Specification Sheet
DSMF

N Shelleymatic

N Shelleymatic
Free-Standing Self-Contained Milk or Beverage Dispensers

Learn More

  • Inner Liner : Inner liner shall be water-tight and constructed of 22-gaug more...e stainless steel with 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed in place polyurethane insulation with a non-conductive to breaker strip.
  • Lid : Each opening shall have a stainless steel sliding lid with more...recessed handles.
  • Louvers : 3) stainless steel louvers shall be installed in the end an more...d sides of the cabinet to allow proper air flow to the condensing unit.
Width : 29"
Depth : 28"
Height : 37"
Weight : 327 lb
 
Enerlogic

Specification Sheet
DSN

N6, N10, N14 Shelleymatic

N6, N10, N14 Shelleymatic
Free-Standing Self-Contained Milk Or Beverage Dispensers

Learn More

  • Compartment : Refrigerated compartment is equipped with drain plumbed to more...a drain valve locaed at the bottom of the counter.
  • Sliding Lid : Each opening shall have a stainless steel sliding lid reces more...sed handles.
  • Louvers : 3) stainless steel louvers shall be installed in the end an more...d sides of the cabinet to allow proper air flow to the condensing unit.
Width : 36"
Depth : 32"
Height : 37"
Weight : 382 lb
 
Enerlogic

Specification Sheet
DSN6_10_14

NLFAC Shelleymatic

NLFAC Shelleymatic
Self contained milk coolers with air curtain

Learn More

  • Interior : shall be 22 gauge stainless steel. Cabinet shall be fully i more...nsulated with 2" (5.1cm) of high-density foamed-in-place polyurethane. Milk crates shall be self-locating in the interior with the use of divider assemblies. Divider assemblies shall be 16-gauge stainless steel. Unit shall have (2) 20-gauge stainless steel louvers, which shall be centered left to right on the front and rear of the equipment. A 0.75" (1.9cm) diameter valve shall be located at the bottom of the equipment, centered left to right, 4.75" (12.1cm) from the rear wall.
  • Refrigeration System : shall use HFC-134a refrigerant. Refrigerant flow shall be c more...ontrolled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature at 100°F (38°C) ambient room temperature with lids closed for storage. Properly chilled food product shall maintain 40°F (4°C) for up to 2 hours when lids are open.
  • Electrical Connections : shall be 115 volt, 60 Hertz, single phase. Unit shall have more...an 8ÂÂ’ (2.4cm) long electrical cord and NEMA 5-15 P plug installed at the rear, 14" (30.5cm) from the left end, 6" (15.2cm) above floor.
Width : 40"
Depth : 32"
Height : 42"
Weight : 401 lb
 
Enerlogic

Specification Sheet
DSNLFAC

SCFM Shelleysteel

SCFM Shelleysteel
Mobile Milk and Ice Cream Counters

Learn More

  • Casters : Unit is mounted on 5" (12.7cm) diameter swivel casters with more... non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
  • Exterior Top : is constructed of 14-gauge stainless steel, welded, ground more...and polished into one integral unit. Top is fabricated with square exterior corners. Top has die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
  • Refrigerated and Freezer Compartments : unit has one refrigerated and one freezer compartment each. more... Compartments have water-tight inner liner constructed of 22-gauge stainless steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Both compartments are equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated and freezer compartments are equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 50"
Depth : 30"
Height : 36"
Weight : 500 lb
 
Enerlogic

Specification Sheet
DSSCFM

SCM Shelleysteel

SCM Shelleysteel
Mobile Milk Counters

Learn More

  • Exterior Top : is constructed of 14-gauge stainless steel, welded, ground more...and polished into one integral unit. Top is fabricated with square exterior corners. Top has one (SCM-36), two (SCM-50), three (SCM-60) or four (SCM-74) die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
  • Casters : Units are mounted on 5" (12.7cm) diameter swivel casters wi more...th non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
  • Refrigerated Compartment : have water-tight inner liner constructed of 22-gauge stainl more...ess steel, with radius corners and 1.5" (3.8cm) of polyurethane insulation. Compartment is equipped with a drain plumbed to a drain valve located in the bottom of the unit. Refrigerated compartment is equipped with automatic self leveling, field adjustable elevators. Divider trays are supplied.
Width : 36"
Depth : 30"
Height : 36"
Weight : 400 lb
 
Enerlogic

Specification Sheet
DSSCM