What make LiquiTec® cold pans different than traditional cold pans? LiquiTec cold pans use a patented eutectic fluid permently sealed in the jacket surrounding the pan opening as a cooling medium. Refrigerant lines cool the eutectic fluid, which in turn, cools the pan. This fluid remains a liquid at extremely cold temperatures, providing consistent, even cooling, keeping food fresh and safe. This unique technology enables Delfield to produce true flush mount cold pans that maintain a safe, consistant temperatures that use less energy to maintain.
Owner/Instruction Manual
Specification Sheet
Warranty
8100EF
LiquiTec - Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
| LiquiTec™ Cold Pans with Eutectic Fluid technology allows food in food pans to be flush with top of counter. Cold pan meets NSF standard 7; and can be dropped into Delfield Mark 7, Shelleyglas® or Shelleysteel™ counters or existing counters. | |
| Top is one-piece stainless steel, with 0.62" (1.6cm) overhang around perimeter and die stamped 19.87" x 11.87" (50cm x 30cm) openings with depressed edges. Formed well below each opening is 6.25" (16cm) deep with 0.5" (1.3cm) stainless steel drain and copper manifold. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30cm x 51cm) pans 4" (10cm) or 6" (15cm) deep supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting NSF 7 requirements. | |
| Sides and bottom are insulated with high-density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) closed-cell polyurethane. The exterior housing is made from galvanized steel. | |
| Refrigeration system uses HFC-404A refrigerant. Eutectic fluid is used as the heat transfer medium. Condensing unit is suspended below the cold pan on a steel frame. Temperature control is supplied with an ON/OFF switch. Unit is supplied with expansion valve. A stainless steel louver is provided for field installation; cutout dimensions is 11" x 22" (28cm x 56cm). A second opening 11" x 22" (28cm x 56cm)at the rear of the cabinet should be provided at installation to allow for proper air circulation. | |
| Electrical system is 115V/60Hz/1Ph with NEMA 5-15P plug. Units have a toggle ON/OFF switch. | |
8118-EF
One 12" x 20" pan capacity
| Width x Depth x Height | 183/16"
x 26"
x 231/4"
(46.20 cm x 66.04 cm x 59.06 cm) |
| Weight | 180 lb (81.6480 kg) |
| Power Output | 7.5 Amps |
| Cutout dimensions | 17" x 25" (43cm x 64cm) |
| Certifications |
   |
8132-EF
Two 12" x 20" pan capacity
| Width x Depth x Height | 313/4"
x 26"
x 305/16"
(80.64 cm x 66.04 cm x 77 cm) |
| Weight | 225 lb (102.0600 kg) |
| Power Output | 7.5 Amps |
| Cutout dimensions | 30.75" x 25" (78cm x 64cm) |
| Certifications |
|
8145-EF
Three 12" x 20" pan capacity
| Width x Depth x Height | 459/32"
x 26"
x 231/4"
(115 cm x 66.04 cm x 59.06 cm) |
| Weight | 235 lb (106.5960 kg) |
| Power Output | 7.5 Amps |
| Certifications |
|
8159-EF
Four 12" x 20" pan capacity
| Width x Depth x Height | 59"
x 26"
x 231/4"
(150 cm x 66.04 cm x 59.06 cm) |
| Weight | 285 lb (129.2760 kg) |
| Power Output | 7.5 Amps |
| Certifications |
|
8172-EF
Five 12" x 20" pan capacity
| Width x Depth x Height | 727/16"
x 26"
x 231/4"
(184 cm x 66.04 cm x 59.06 cm) |
| Weight | 295 lb (133.8120 kg) |
| Power Output | 7.5 Amps |
| Certifications |
|
8186-EF
Six 12" x 20" pan capacity
| Width x Depth x Height | 8553/64"
x 26"
x 231/4"
(218 cm x 66.04 cm x 59.06 cm) |
| Weight | 306 lb (138.8016 kg) |
| Power Output | 7.5 Amps |
| Certifications |
|
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
