8100EFN

One-piece 18-gauge stainless steel, with .62" (1.57cm) overhang around perimeter and die stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5"drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF 7 requirements. Sides and bottom: are insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.

Sides and bottom: are insulated with high-density closed-cell polyurethane. Exterior housing is 22-gauge galvanized steel.

Refrigeration: system uses HFC-404A refrigerant. Eutectic fluid is used as the heat transfer medium. Condensing unit is suspended below the cold pan on a 16-gauge steel frame. Temperature control has an OFF position to shut down the cold pan. Unit is supplied with expansion valve. A stainless steel louver is provided for field installation; cutout dimension is 11" x 22" (27.94cm x 55.88cm). A second opening 11" x 22" (27.94cm x 55.88cm) at the rear of thecabinet should be provided at installation to allow for proper air circulation.

Electrical system is 115/60c/1ph with NEMA 5-15P plug.