Drop-In Self-Contained Forced Air Refrigerated Cold Pans
Top is one-piece 20-gauge stainless steel. Interior liner is 22-gauge stainless steel and is creased to a 1.00" (2.54cm) diameter drain. A stainless steel bracket adjusts for pans flush with top, recessed 1" (2.54cm), 2" (5.1cm), or 3" (7.6cm) to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (10.2cm) or 6" (15.2cm) deep supplied by others. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained when 4" (10.2cm) deep pans are recessed 3" (7.6cm) at 86°F ambient room temperature, meeting NSF 7 requirements. Adapter bars are optional.
Sides and bottom are insulated with high-density closed-cell polyurethane. Exterior housing is 24-gauge galvanized steel.
Refrigeration system uses HFC-404A refrigerant. Condensing unit is suspended below the cold pan on a 16-gauge steel frame. Temperature control has an OFF position to shut down the cold pan. Unit is supplied with expansion valve. Evaporator coil cools pans by air flowing over and under pans. A stainless steel louver is provided for field installation; cutout dimension is 11" x 22" (27.94cm x 55.88cm). A second opening at the rear of the cabinet should be provided at installation to allow for proper air circulation.
Air Curtain assembly is removable without the use of tools.
Electrical system is 115/60c/1ph with NEMA 5-15 plug on the 8131-FA, 8144-FA and 8157-FA models. The 8169-FA and 8182-FA models come with a NEMA 5- 20 plug.