Please Note : You may require Adobe Acrobat Reader to view these documents.
Drop-In curved mechanically cooled cold pan
Width x Depth x Height
(187 cm x 66 cm x 55 cm)
Top is one-piece 18-gauge stainless steel. Interior liner is 22-gauge stainless steel and is creased to a 1.00" (3cm) diameter drain. Stainless steel holding clips accommodate 12" x 20" (30cm x 51cm) pans 4" or 6" (10cm or 15cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (29ËC) ambient room temperature, meeting NSF 7 requirements. Adapter bars are standard.
Sides and bottom are wrapped with refrigeration lines and insulated with high-density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) closed cell polyurethane. Exterior housing is 24-gauge galvanized steel.
Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-134a refrigerant. Temperature control has an ON/OFF position to shut down cold pan. Unit has an 8' (2.4m) cord and NEMA 5-15P plug.
A stainless steel louver is provided for field installation; cutout dimension is 12" x 23.5" (30cm x 60cm). A second opening at the rear of the cabinet should be provided at installation to allow for proper air circulation.
Delfield reserves the right to make changes to the design or specifications without prior notice.
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
See Downloads for warranty info.
Custom pan template
Single or double service flip-up sneezeguards
Flexishield® foodshields, single or dual service
Mullion fan assembly
Remote refrigeration (specify refrigerant)
220V/50cycle * * Inclusion of this option will alter electrical specifications of unit.