The 6000Xl series reach-in refrigeration is specifically designed to serve the commercial foodservice market. Well thought out features like efficient and space saving top mount refrigeration systems, stay open doors that make loading and unloading easy, very cleanable seamless interior liners and the capability to accommodate 18"x26" sheet pans make the 6000XL series a perfect fit for enhancing productivity in your foodservice operation.
Glass Door Reach-In Refrigerators
|Exterior||Top and bottom are constructed of 24-gauge galvanized steel. Exterior sides are 0.032 aluminum. Front housing is 22-gauge stainless steel.|
|Doors||Unit is provided with hinged glass front door(s). Doors are provided with magnetic gaskets, self-closing, edge mount hinges; and quick grip long length door handle(s).|
|Interior||Liner is constructed of seamless, one piece ABS material with 15 molded shelf supports spaced 3.00"(7.6cm) apart. Three epoxy coated wire shelves, rated at 250 lb. load capacity each, are provided per section. Liner comes with a limited lifetime warranty.
Units are completely insulated with a minimum of 2.00"(5.08cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP ( Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation.
Interior is lighted by one 40-watt incandescent light on one and two door models, and two 40-watt incandescent lights (by others) on three door models. Lights are located outside of the food zone. Door activated switches control the lights.
|Refrigeration System||All components are mounted to the exterior cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. System has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield's ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reducing compressor cycling and longer compressor life with lower energy consumption.|
|Control System||The control system uses adaptive defrost to assure evaporator coil is free of ice and operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system. Temperature is displayed with digital display using a blue LED.|
|Other||Unit is supplied standard with a 10'cord and plug, attached. Units are standard with legs. Legs are constructed of painted metal and are 6” high with 1” adjustability to compensate for installation location factors. Shipped loose for field installation.|
|Delfield reserves the right to make changes to the design or specifications without prior notice.|