Brochure or Sell Sheet
Owner/Instruction Manual
Specification Sheet
Warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
SSR2/SAR2/SMR2
Self-Contained Sliding Door Reach-In Refrigerator
| Width x Depth x Height | 56"
x 34"
x 811/8"
(142.24 cm x 86.36 cm x 206.0 cm) |
| Weight | 670 lb (303.9120 kg) |
| Power Output | 9.0 Amps |
| Exterior | SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system. |
| Interior | Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1" increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior. |
| Doors | Solid Sliding. Exterior and interior shall be corrosion resistant stainless steel. Glass Sliding. Double thermopane glass set in high impact black plastic frame. Doors are set in tracks for easy movement. Spring action assures self closing. Gasket seals both ends of doors. Doors are removable for cleaning. |
| Refrigeration System | All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 33ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield's ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system. |
| Electrical | Standard electrical connections shall be 115V, 60 Hz single phase. A 10' cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. |
| Certifications |
   |
SSR2-SLS, SLSH
Stainless steel interior and exterior solid sliding door reach-in refrigerator
SSR2-SLG, SLGH
Stainless steel interior and exterior glass door rech-in refrigerator
SAR2-SLS, SLSH
Stainless steel exterior and aluminum interior solid sliding door reach-in refrigerator
SAR2-SLG, SLGH
Stainless steel exterior and aluminum interior glass sliding door reach-in refrigerator
SMR2-SLS, SLSH
Stainless steel front, aluminum exterior and interior solid sliding door reach-in
SMR2-SLG, SLGH
Stainless steel front, aluminum exterior and interior glass sliding door reach-in refrigerator
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
