SSRRT/SARRT/SMRRT Specification Line

Self-Contained Solid Door Roll-Thru Refrigeration

The Delfield Specification Line is the single finest line of reach-ins ever developed. Every detail is engineered to perfection, from the removable top mounted refrigeration system to the seamless, die-stamped interior top and bottom. The styling alone is a work of art. And with an astonishing range of features and options - from pull drawers to microprocessor controls - the Specification Line delivers the ultimate customized performance.

SS Series

Stainless steel interior and exterior

SA Series

Stainless steel exterior, aluminum interior

SM Series

Aluminum interior and exterior, stainless front

Built in door locks with heavy duty strikes

Recessed metal door handle

Exterior digital thermometer with high/low temperature alarm

Easy to use electronic control

Easy access "flip-up" Shroud

Tough ABS interior door liners

10' attached cord and plug

Stainless steel breaker strips

Environmentally friendly foam

High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

Energy savings door heater switch

Two year parts & labor warranty

Five year compressor warranty


Buy This Product Online

Brochure or Sell Sheet

Owner/Instruction Manual

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

SSRRT/SARRT/SMRRT Specification Line

Self-Contained Solid Door Roll-Thru Refrigerator

Exterior SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior. Each section can accommodate a 28 1/2" x 27 1/4" x 72" cart.
Doors Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.
Refrigeration System All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 33ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield's ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.
Electrical Standard electrical on one and two section units shall be 115V, 60 Hz single phase. A 10' cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Three section units shall be 115/208-230 and will require hardwire connections.

SSRRT1-S

Stainless steel interior and exterior solid door refrigerator

Width x Depth x Height 34" x 361/4" x 89"
(86.4 cm x 92.1 cm x 226.1 cm)
Weight 514 lb (233.1504 kg)
Power Output 7.8  Amps
Energy Use3.97 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SSFRT2-S

Stainless steel interior and exterior solid door roll-thru refrigerator

Width x Depth x Height 65" x 361/4" x 905/16"
(167.6 cm x 92.1 cm x 229.4 cm)
Weight 776 lb (351.9936 kg)
Power Output 16.0  Amps
Energy Use6.77 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SSRRT3-S

Stainless steel interior and exterior solid door roll-thru refrigerator

Width x Depth x Height 97" x 361/4" x 897/8"
(248.9 cm x 92.1 cm x 228.3 cm)
Weight 1116 lb (506.2176 kg)
Power Output 11.3  Amps
Energy Use8.01 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SARRT1-S

Stainless steel exterior and aluminum interior solid door roll-thru refrigerator

Width x Depth x Height 34" x 361/4" x 89"
(86.4 cm x 92.1 cm x 226.1 cm)
Weight 514 lb (233.1504 kg)
Power Output 7.8  Amps
Energy Use3.97 KWh daily
Certifications Manitowoc EnerLogic UL CUL

SARRT2-S

Stainless steel exterior and aluminum interior solid door roll-thru refrigerator

Width x Depth x Height 65" x 361/4" x 905/16"
(167.6 cm x 92.1 cm x 229.4 cm)
Weight 776 lb (351.9936 kg)
Power Output 16.0  Amps
Energy Use6.77 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SARRT3-S

Stainless steel exterior and aluminum interior solid door roll-thru refrigerator

Width x Depth x Height 97" x 361/4" x 897/8"
(248.9 cm x 92.1 cm x 228.3 cm)
Weight 1116 lb (506.2176 kg)
Power Output 11.3  Amps
Energy Use8.01 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SMRRT1-S

Stainless steel front, aluminum exterior and interior solid door roll-thru refrigerator

Width x Depth x Height 34" x 361/4" x 89"
(86.4 cm x 92.1 cm x 226.1 cm)
Weight 514 lb (233.1504 kg)
Power Output 7.8  Amps
Energy Use3.97 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SMRRT2-S

Stainless steel front, aluminum exterior and interior solid door roll-thru refrigerator

Width x Depth x Height 65" x 361/4" x 905/16"
(167.6 cm x 92.1 cm x 229.4 cm)
Weight 776 lb (351.9936 kg)
Power Output 16.0  Amps
Energy Use6.77 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

SMRRT3-S

Stainless steel front, aluminum exterior and interior solid door roll-thru freezer

Width x Depth x Height 97" x 361/4" x 897/8"
(248.9 cm x 92.1 cm x 228.3 cm)
Weight 1116 lb (506.2176 kg)
Power Output 11.3  Amps
Energy Use8.01 KWh daily
Certifications Manitowoc EnerLogic UL CUL NSF

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

Manitowoc EnerLogic UL CUL NSF

 

See Downloads for warranty info.

Security package

Door field rehingeability

Stainless steel interior door liner

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

230-50-1 electrical

220-6-1 electrical

SSRRI/SARRI/SMRRI Specification Line

SSRRI/SARRI/SMRRI Specification Line
Self-Contained Glass Door Roll-In Refrigeration

Learn More

SSRRI/SARRI/SMRRI Specification Line

SSRRI/SARRI/SMRRI Specification Line
Self-Contained Solid Door Roll-In Refrigeration

Learn More

SSRRT/SARRT/SMRRT Specification Line

SSRRT/SARRT/SMRRT Specification Line
Self-Contained Solid Door Roll-Thru Refrigeration

Learn More