Please Note : You may require Adobe Acrobat Reader to view these documents.
Self-Contained Undercounter Refrigerator
Width x Depth x Height
(121.92 cm x 72.07 cm x 90.17 cm)
Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned down.
Exterior bottom shall be one-piece, 14-gauge galvanized metal. Exterior ends shall be 22-gauge stainless steel.
Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handles shall be black, recessed ABS.
Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, 16” (41 cm) above floor, 12” (30 cm) from left side. Equipment is shipped with loose 6” (15 cm) high metal legs with black enamel finish unless mounting is specified on original sales order.
Equipment is shipped with loose 6" (15cm) high metal legs with black enamel finish unless mounting is specified on original sales order.
Refrigeration system shall use HFC-404A refrigerant. Compressor shall be 1/5 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil shall be mounted on the interior rear wall of the cabinet. Temperature control shall be mounted to the exterior rear wall of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature.
Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. ABS interior is backed by a limited lifetime warranty. Cabinet shall have (4) epoxycoated wire shelves installed. Base shall be fully insulated with high-density foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
2.04 KWh daily
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
See Downloads for warranty info.
Stainless steel back
Plastic laminate on front
3” (8 cm) diameter casters (recommended for under counter)