Brochure or Sell Sheet
Owner/Instruction Manual
Specification Sheet
Please Note : You may require Adobe Acrobat Reader to view these documents.
UC4464N, UCD4464N Standard
Self-contained Front-Breathing Undercounter Refrigerated Base
| Width x Depth x Height | 641/8"
x 311/2"
x 341/4"
(162.88 cm x 80.01 cm x 87.00 cm) |
| Weight | 395 lb (179.1720 kg) |
| Power Output | 12 Amps |
| Exterior Top | Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front. |
| Exterior back and bottom | Exterior back and bottom are two-piece 24-gauge galvanized steel. |
| Exterior ends | Exterior ends are stainless steel. |
| Interior sides of door models | Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is onepiece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place polyurethane. |
| Refrigeration | Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet.Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). |
| ACT control | ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. |
| Electrical Connections | Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7' (2.1m) long electrical cord and NEMA 5-15P plug. |
| Casters | Casters: Equipment is mounted on 2" (5.08cm) diameter front locking plate casters. 2.5" (6.35cm) ride height. |
| Doors | Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. |
| Drawers | Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12" x 20" (30.5cm x 50.8cm x 10.1cm) and three 1/6 size 4"-6" deep pans. Bottom drawer holds one 12" x 20" and three 1/6 size 4" deep pans. Pans are supplied by others. |
| Energy Use | 3.0 KWh daily |
| Certifications |
    |
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
Construction
18" wide single tier overshelf
Laminate
Plastic laminate on front
Shelf
Additional wire shelves
Cover
Flat lift off cover
Electrical
220V/50 Hertz electrical system
Lock
Door lock
Back
Stainless steel finish on back
Exterior thermometer
Interior lights
