Mobile Self-Contained LiquiTec Cold Pan Serving Counters
Exterior body is constructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports.
Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).
is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.
LiquiTec Cold Pan
has 2-6 die stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.
uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control. Unit is wired with a 3-wire, grounded, maximum 10' (3m) cord and plug. Unit has an on/off switch mounted on the exterior.