Exterior Body is constructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports.
is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75" x 20.75" x 6" (32.4cm x 52.7cm x 15.2cm) pan.
Units are mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6" (15.2cm).
Heated Food Warmers
are constructed of die-stamped stainless steel. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a 3-wire, grounded minimum 10ÂÂÂ’ (3m) long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service. Unit has an on/off switch mounted on the exterior.
Insulated Ice Pan
is 7" (17.8cm) deep and constructed of 22-gauge stainless steel. A removable, peforated false bottom 1" (2.54cm) high, constructed of stainless steel is supplied. The ice pan is seperated from the exterior top by a concealed breaker strip and fully insulated with foamed-in-place polyurethane insulation. Ice pan is equipped with a drain valve located at the bottom of the unit.