SRB Shelleysteel

Mobile Carving Counters

Exterior body is constructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports.

Casters

Unit is mounted on 5" (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6.00" (15.2cm).

Exterior Top

is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners.

Carving Tray

unit has a removable, stainless steel, perforated carving tray, pan and meat holder. A 250 watt heat lamp is mounted directly over the carving tray. Underneath the carving area is a stainless steel lining for easy cleaning.

Au Jus Well

unit has a 250 watt heated stainless steel au jus well with adjustable thermostat and stainless steel insert pan. Heat lamp and au jus well are wired to a 120 volt, 50 Hertz, single phase, 3-wire grounded, maximum 10' (3m) cord and plug.

Dry Compartment

unit has a one-door dry compartment constructed of 18-gauge stainless steel. Compartment is equipped with a shelf. Door has double-wall construction, with a stainless steel front panel.


Buy This Product Online

Brochure or Sell Sheet

Owner/Instruction Manual

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

SRB Shelleysteel

Mobile Carving Counters

Width x Depth x Height 28" x 30" x 36"
(71.12 cm x 76.20 cm x 91.44 cm)
Weight 180 lb (81.6480 kg)
Certifications UL CUL NSF

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

UL CUL NSF

 

See Downloads for warranty info.

ST

Stainless steel trim strips

A

12" (30.5cm) wide stainless steel fold-down tray slide

X

Laminate exterior panels in lieu of stainless steel exterior panels

C

10" (25.4cm) wide three-bar fold-down tray slide

F

Line-up interlock device

D

10" (25.4cm) wide composite fold-down cutting boards

E

10" (25.4cm) wide stainless steel fold-down work shelf

Q

120V/60Hz/1ø, 10 amp convenience outlet with breaker

T

Heated understorage (667 watt heating element) with wire shelf

V

6" (15.2cm) high adjustable stainless steel legs in lieu of casters

KRB Shelleyglas

KRB Shelleyglas
Mobile Carving Counters

Learn More

SRB Shelleysteel

SRB Shelleysteel
Mobile Carving Counters

Learn More