Brochure or Sell Sheet
Installation Guide
Owner/Instruction Manual
Specification Sheet
Warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
DC-FT6
Self-contained frost top serving counter
| Width x Depth x Height | 94"
x 36"
x 36"
(238.76 cm x 91.44 cm x 91.44 cm) |
| Weight | 987 lb (447.7032 kg) |
| Power Output | 8.0 Amps |
| Exterior Body | is constructed of 0.75" Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1" polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized Steel. The exterior ends are unfinished. Ends are supported by 12 gauge galvanized steel front to rear braces. |
| Exterior Top | is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel. Top end supports are 12 gauge stainless steel |
| Interior base | Bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel. |
| Frost top | Frost top is 18-gauge stainless steel, one-piece construction and perimeter trough. Underside of frost top is sealed with refrigeration lines and insulated with high density, closed cell polyurethane. Frost top assembly is enclosed in a galvanized steel jacket. |
| Refrigeration system | uses HCFC-404A refrigerant and has a self-contained 115 volt, 60 hertz, single phase hermetically sealed condensing unit with adjustable frost top temperature control. Unit has an on/off switch mounted behind the mechanical access door. Frost top is equipped with a 0.5” stainless steel drain plumbed to drain valve located behind the hinged louvered door. |
| Legs | Bases are mounted on 6.12"(15.5cm) adjustable legs. |
| Delfield reserves the right to make changes to the design or specifications without prior notice. | |
| Certifications |
   |
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
