Concepts™ is a leading-edge solution that breaks the mold on traditional serving lines.
Let your imagination run wild, break the mold and be inspired!
Start by using standard components. Add options, accessories and finishes that meet your needs. End with a serving solution that has the look and feel of a custom solution but without the custom price tag. That’s the new Concepts line by Delfield. It’s a whole new wave of serving line equipment.
Heavy duty stainless steel top
Reinforced stainless steel front and rear removeable panels
Flush mount die stamped stainless steel heated food well
Heavy duty base support structure
Standard on 6" legs
Wet and dry operation
0.5" stainless steel drains
Individual infinite temperature controls
Must be hard wired in the field
11.87" x 19.87" single hot food wells are manifolded together in one main gate valve
Please Note : You may require Adobe Acrobat Reader to view these documents.
Heated Serving Counter
Width x Depth x Height
(238.76 cm x 91.44 cm x 91.44 cm)
is constructed of 0.75" Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1" polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized Steel. The exterior ends are unfinished. Ends are supported by 12 gauge galvanized steel front to rear braces.
is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel.
Bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel.
Heated food warmers
are constructed of die-stamped stainless steel. Heated food warmers are insulated on bottom. Each heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Warmers are equipped with a .5" stainless steel drain plumbed to the drain valve located behind the hinged louvered door.
Bases are mounted on 6.12"(15.5cm) adjustable legs.
Delfield reserves the right to make changes to the design or specifications without prior notice.
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
See Downloads for warranty info.
Custom lengths available per inch
Granite, Hanstone® and Solid Surface top materials
Laminated base panels
Finished stainless steel or laminated end panels
Signage with overstructures, lights and heatlamps
Refrigerated base inserts
Heated base inserts
Dry storage base inserts
Mechanical access doors
Adapter plates and bars
220V/50 cycle. Inclusion of this option will alter electrical specifications of the unit