Brochure or Sell Sheet
Installation Guide
Owner/Instruction Manual
Specification Sheet
Warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
DCRU-L2
Radial self-contained LiquiTec® cold pan serving counter
| Width x Depth x Height | 1035/32"
x 3553/64"
x 3553/64"
(262 cm x 91 cm x 91 cm) |
| Weight | 679 lb (307.9944 kg) |
| Power Output | 7.2 Amps |
| Exterior Body | is constructed of 0.75" Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1" polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized Steel. The exterior ends are unfinished. Ends are supported by 12 gauge galvanized steel front to rear braces. |
| Exterior Top | is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel. |
| Interior base | Bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel. |
| The LiquiTec® cold pan | has 2-6 die stamped 19.87"x11.87" (50.5cm x 30.2cm) opening with depressed edges. Formed well below each opening is 6.25" (15.9cm) deep with 0.5"drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12"x20" (30.2cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm) deep, supplied by others. Product temperatures of 33ËšF (1ËšC) to 41ËšF (5ËšC) are maintained at 86ËšF (30ËšC) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is full y insulated with foamed in place polyurethane insulation. Cold pans are equipped with a 0.5" stainless steel drain plumbed to the drain valve located behind the hinged louvered door. |
| Refrigeration system | uses HFC-134A refrigerant and has a self-contained 115 volt, 60 hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control. |
| Legs | Bases are mounted on 6.12"(15.5cm) adjustable legs. |
| Delfield reserves the right to make changes to the design or specifications without prior notice. | |
| Certifications |
   |
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
