From idea, to concept, to design, Delfield’s Production Centers can accelerate your culinary success. With years of design experience and integration, Delfield will deliver the most efficient ergonomic system. We can integrate not only Delfield cold and storage units, but also heating and holding units from Cleveland, Lincoln, Merco, Garland and Merrychef.
Add pasta to any operation! The Delfield Pasta Production Center combines all of the necessary components for a successful pasta operation into one footprint. Why have multiple components spread throughout the kitchen when it can all be designed to function as one! The single footprint design improves operations by saving valuable time and kitchen floor space while increasing speed of service. Turn pasta plates in minutes even at the busiest parts of the day! Delfield's proven design with integrated Induction by Garland is the answer.
Self contained refrigerated base with heavy duty drawers
Drawers are backed by a 10-year warranty on the track assembly
Self contained LiquiTec® cold pan
Built-in wok style induction cooker
Two pasta rethermalizers
Sauce warmer, sized for 1/3 pan
Utility bin, sized for 1/3 pan
Environmentally friendly R404A refrigerant
Adapter bars for drawers provided
Mounted on casters for easy cleaning and installation
High density foamed in place environmentally friendly foam
Kyoto Protocol compliant, non ODP (Ozone Depletion Potential), non GWP (Global Warming Potential) polyurethane keeps energy costs low
One year parts and labor, five year compressor standard warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
Pasta Production Center
Width x Depth x Height
(236 cm x 99 cm x 112 cm)
Exterior top is one-piece, 14-gauge stainless steel with integral 2.12" ( 5.4cm) high square nosing on the front. Top has a self contained LiquiTec® cold pan. It also features four built-in wok style induction cookers, two past rethermalizers, a sauce warmer (sized for 1/3 size pan) and a utility bin (sized for a 1/3 size pan). Cold pan top opening temperature maintains 33˚F (1˚C) to 40˚F (5˚C) at 86˚ ambient room temperature, meeting NSF7 certification.
Exterior Back and Bottom
Exterior Back and Bottom are 18-gauge galvanized steel. Exterior ends are finished with 22-gauge stainless steel.
Base Interior has 22-gauge stainless steel back and bottom. Refrigerated base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Drawers have a 22-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. 19" drawers hold one full size 12" x 20" pan, 4"-6" (10.1cm - 15.2cm) deep, each 27" drawer holds two full size 12" x 20" pan, 4"-6" (10.1cm - 15.2cm) deep. Pans are supplied by others.
Refrigeration System uses HFC-404A refrigerant. Cabinet has a blower coil assembly with expansion valve located behind door mullion. Base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. On/off switch for unit is located on panel above louver. Refrigeration system in the base will maintain 36°F (2°C) to 40°F (4°C).
Casters: Unit is mounted on 5" casters (6.12" ride height), diameter plate casters with front locking.
Electrical connections are 120/208 volt, 60 Hertz, three phase. Unit must be hard wired.
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.