CAB2 Shelleymatic
Mobile enclosed two-stack dish dispensers
- CAB2-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB2-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-20P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless steel cover.
Width : 281/2"
Depth : 17"
Height : 36"
Specification Sheet
DSCAB2
CAB3 Shelleymatic
Mobile enclosed three-stack dish dispensers
- CAB3-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB3-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 5-20P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless steel cover.
Width : 411/4"
Depth : 17"
Height : 36"
Specification Sheet
DSCAB3
CAB4 Shelleymatic
Mobile enclosed four-stack dish dispensers
- CAB4-ET EVEN TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208-230 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- CAB4-QT QUICK TEMP HEATED DISPENSERS ONLY: : Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208-230 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Each tube shall have a stainless dome cover.
Width : 27"
Depth : 27"
Height : 36"
Specification Sheet
DSCAB4
DIS Shelleymatic
Drop-in dish dispensers
- APPLIES TO DIS-ET EVEN TEMP HEATED DISPENSERS ONLY: : Dish dispenser shall have a 22-gauge stainless steel outer jacket. Unit shall be supplied with 4'0" (0.9m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. The tube shall have its own convection heating module consisting of a single 400 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. The tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit requires a minimum of 1" (2.54cm) clearance at bottom for air circulation. Unit shall maintain temperature between 120°F - 140°F (49°C - 60°C).
- APPLIES TO DIS-QT QUICK TEMP HEATED DISPENSERS ONLY: : Dish dispenser shall have a 22-gauge stainless steel outer jacket. Unit shall be supplied with 3' (0.9m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. The tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. The tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit requires a minimum of 1" (2.54cm) clearance at bottom for air circulation. Unit shall maintain temperature between 150°F - 170°F (66°C - 77°C).
- Cover : Unit shall have a stainless steel cover.
Width : 85/16"
Depth : 73/4"
Height : 28"
Specification Sheet
DSDIS