CAB4-QT Shelleymatic

Mobile enclosed four-stack quick temp heated dish dispensers

Cabinet top to be 16-gauge stainless steel
Outer body and corners to be 20-gauge stainless steel
Non-marring gray corner bumpers
(4) 4.00” locking polyolefin swivel casters
Dispenser top flange, vertical side channels and bottom brace are stainless steel
Dispenser flange, channels and bottom to be integrally welded
Spring supports to be 14-gauge S/S
Carrier head made of welded rods with a removable 18-gauge top plate
Field adjustable self-leveling mechanism
High impact plastic guide posts mounted to flange
9’ cord and plug
Convection heating module and fan motor per dispenser
22-gauge stainless steel jacket around dispenser
Air intake shall be filtered
On/off switch on each dispenser
Adjustable thermostat per dispenser
QT- stainless steel cover per dispenser
QT maintains 150-170°F (66-77°C)


Buy This Product Online

Brochure or Sell Sheet

Owner/Instruction Manual

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

CAB4-QT Shelleymatic

Mobile enclosed four-stack quick temp heated dish dispensers

Cabinet Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels. Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel. Unit shall have four 4.00" (10cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner.
Dispenser Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel. Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic.
Self-Leveling mechanism Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate.
Capacity Capacity of tubes shall be approximately 72 dishes, with a maximum stacking height of 24.00" (61cm).
Quick Temp Heated Unit shall be supplied with 9' (2.7m) cord and NEMA 6-20P plug. Electrical connections shall be 208 volt, 60 hertz, single phase. Each tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake shall have a filter. Each tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit shall maintain temperature between 150°F–170°F (66°C–77°C). Each tube shall have a stainless steel dome cover.
Certifications UL CUL NSF

CAB4-813QT

4 stack quick temp heated dish dispenser

Width x Depth x Height 321/4" x 321/4" x 36"
(81.92 cm x 81.92 cm x 91.44 cm)
Weight 290 lb (131.5440 kg)
Power Output 2800  Watts
Dish diameter range 7.25”-8.12” (18cm-21cm)
Certifications UL CUL NSF

CAB4-913QT

4 stack quick temp heated dish dispenser

Width x Depth x Height 321/4" x 321/4" x 36"
(81.92 cm x 81.92 cm x 91.44 cm)
Weight 298 lb (135.1728 kg)
Power Output 2800  Watts
Dish diameter range 8.12”-9.12” (21cm-23cm)
Certifications UL CUL NSF

CAB4-1013QT

4 stack quick temp heated dish dispenser

Width x Depth x Height 321/4" x 321/4" x 36"
(81.92 cm x 81.92 cm x 91.44 cm)
Weight 306 lb (138.8016 kg)
Power Output 2800  Watts
Dish diameter range 9.12”-10.12” (23cm-26cm)
Certifications UL CUL NSF

CAB4-1200QT

4 stack quick temp heated dish dispenser

Width x Depth x Height 36" x 36" x 36"
(91.44 cm x 91.44 cm x 91.44 cm)
Weight 333 lb (151.0488 kg)
Power Output 2800  Watts
Dish diameter range 10.12”-12.00” (26cm-30cm)
Certifications UL CUL NSF

CAB4-1450QT

4 stack quick temp heated dish dispenser

Width x Depth x Height 42" x 42" x 36"
(106.68 cm x 106.68 cm x 91.44 cm)
Weight 351 lb (159.2136 kg)
Power Output 2800  Watts
Dish diameter range 12.00”-14.50” (30cm-37cm)
Certifications UL CUL NSF

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

UL CUL NSF

 

See Downloads for warranty info.

12” diameter S/S dish dispenser tray (-1200 and -1450 models only)

Rods for oval dishes and diameter adjustment (-813 through -1450 only)

Stainless steel tube cover (-500 through -725 models only)

Stainless steel dome cover (-813 through -1450 models only)

Hold-down rod for dispenser tubes

Wrap-around bumpers

Four 4” or 5” polyurethane casters

Flange-mount feet in lieu of casters

220 volt, 50/60 cycle, single phase electrical connections*

* Inclusion of these options will alter the electrical specifications of unit

Shorten dispenser tubes to special length

CAB2 Shelleymatic

CAB2 Shelleymatic
Mobile enclosed two-stack unheated dish dispensers

Learn More

CAB2-ET Shelleymatic

CAB2-ET Shelleymatic
Mobile enclosed two-stack even temp heated dish dispensers

Learn More

CAB2-QT Shelleymatic

CAB2-QT Shelleymatic
Mobile enclosed two-stack quick temp heated dish dispensers

Learn More

CAB3 Shelleymatic

CAB3 Shelleymatic
Mobile enclosed two-stack unheated dish dispensers

Learn More

CAB3-ET Shelleymatic

CAB3-ET Shelleymatic
Mobile enclosed three-stack even temp heated dish dispensers

Learn More

CAB3-QT Shelleymatic

CAB3-QT Shelleymatic
Mobile enclosed three-stack quick temp heated dish dispensers

Learn More

CAB4 Shelleymatic

CAB4 Shelleymatic
Mobile enclosed two-stack unheated dish dispensers

Learn More

CAB4-ET Shelleymatic

CAB4-ET Shelleymatic
Mobile enclosed four-stack even temp heated dish dispensers

Learn More

CAB4-QT Shelleymatic

CAB4-QT Shelleymatic
Mobile enclosed four-stack quick temp heated dish dispensers

Learn More

DIS Shelleymatic

DIS Shelleymatic
Drop-in dish dispensers

Learn More

DIS-ET Shelleymatic

DIS-ET Shelleymatic
Drop-in Even Temp Heated dish dispensers

Learn More

DIS-QT Shelleymatic

DIS-QT Shelleymatic
Drop-in Quick Temp Heated dish dispensers

Learn More