• Manitowoc Foodservice USA
  • About Us
  • Contact Us

Trays

 
Product Name
Key Product Features
Dimensions
Rating
Downloads
CT Shelleymatic

CT Shelleymatic
Mobile Cantilevered Tray and Rack Dispensers

Learn More

 
Width : 13"
Depth : 22"
Height : 37"
 

Specification Sheet
MSCT

FT2-SN Shelleymatic

FT2-SN Shelleymatic
Mobile open frame multi-stack tray and rack dispensers

Learn More

  • Housing : Center housing shall be two-piece molded fiberglass, specif more...y color, with stainless steel corners. The fiberglass reinforced polyester (F.R.P.) shall be molded with permanent color. Center housing top shall be 16-gauge stainless steel. Top should contain two Shelleymatic model ND drop-in napkin dispensers.
  • Bin : Silverware bin shall be stainless steel, welded and polishe more...d, with ten holes to accept silverware cylinders. Silverware bin shall be provided with 10 plastic silverware cylinders. Unit shall have 4.00" (10.2cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner.
  • Dispenser : Dispenser platform carrier shall be 18-gauge stainless stee more...l and shall be removable for cleaning. Each dispenser shall have two self-leveling mechanisms.
Width : 433/4"
Depth : 221/8"
Height : 563/8"
 

Specification Sheet
DSFT2_SN

LT Shelleymatic

LT Shelleymatic
Drop-in tray and rack dispensers

Learn More

  • Platform : Dispenser platform carrier shall be 18-gauge stainless stee more...l and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms.
  • Self-Leveling : Self-leveling mechanisms shall be field adjustable by addin more...g or removing stainless steel extension springs located inside the elevator housing
Width : 153/4"
Depth : 221/8"
Height : 271/2"
 

Specification Sheet
dslt

NDF Shelleymatic

NDF Shelleymatic
Mobile Drop-Front Self-Contained Milk or Beverage Dispensers

Learn More

  • Handles : Opening shall have stainless steel lift-up and fold-down li more...ds with black plastic recessed handles. Door lock is standard.
  • Louvers : Ends of the upperstructure shall have die-stamped louvers t more...o allow proper air flow to the condensing unit.
  • Refrigeration System : Refrigeration system shall use HFC-134a refrigerant. Refrig more...erant flow shall be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature with lids closed for storage.
Width : 34"
Depth : 3513/16"
Height : 57"
Enerlogic

Specification Sheet
DSNDF

NSCF Shelleymatic

NSCF Shelleymatic
Free-Standing Self-Contained Milk & Ice Cream Dispenser

Learn More

  • Interior : Interior shall have (2) separate compartments, one refriger more...ated and one freezer. Inner liners shall be water-tight and constructed of 22-gauge stainless steel with a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-inplace polyurethane insulation with a non-conductive top breaker strip.
  • Lid : Each opening shall have an insulated, stainless steel foldi more...ng lid with high impact plastic liner, molded rubber edge and black plastic handles.
  • Lovers : (3) stainless steel louvers shall be installed in the end a more...nd sides of the cabinet to allow proper air flow to the condensing unit.
Width : 48"
Depth : 28"
Height : 37"
 

Specification Sheet
DSNSCF

T, T2

T, T2
Mobile enclosed tray and rack dispensers

Learn More

  • Platform : Dispenser platform carrier shall be 18-gauge stainless stee more...l and shall be removable for cleaning.
  • Extension Springs : Each dispenser shall be field adjustable by adding or remov more...ing stainless steel extension springs located inside the elevator housing.
  • APPLIES TO T/T2-H HEATED DISPENSERS : Heated dispensers shall have a stainless steel liner separa more...ted from the outer panels by 2.00" (5.1cm) of fiberglass insulation. Unit shall be supplied with 9' (2.7m) cord and plug as shown in the specifications table on reverse. Electrical connections shall be 120 volt, 60 hertz, and single phase.
Width : 231/8"
Depth : 163/4"
Height : 36"
 

Specification Sheet
DST

TT, TT2 Shelleymatic

TT, TT2 Shelleymatic
Mobile open frame/multi stack tray and rack dispensers

Learn More

  • Casters : Unit shall have four 4.00" (10.2cm) diameter polyolefin swi more...vel casters (all locking), and non-marking gray bumpers at each corner.
  • Platform : Dispenser platform carries shall be 18-gauge stainless stee more...l and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms.
  • Self Leveling : Self-leveling mechanisms shall be field adjustable by addin more...g or removing stainless steel extension springs located inside the elevator housing.
Width : 211/4"
Depth : 151/4"
Height : 36"
 

Specification Sheet
DSTT_TT2