Mobile Drop-Front Self-Contained Milk or Beverage Dispensers
Exterior sides, front and back shall be 20-gauge stainless steel.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel with a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed in place polyurethane insulation with a non-conductive top breaker strip.
Opening shall have stainless steel lift-up and fold-down lids with black plastic recessed handles. Door lock is standard.
Ends of the upperstructure shall have die-stamped louvers to allow proper air flow to the condensing unit.
Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature with lids closed for storage.
Refrigeration system shall be controlled by a pressure control, located near the condensing unit.
Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have a 9' (2.7m) long electrical cord and NEMA 5-15P plug.
Casters / Bumpers
Unit shall be mounted on (4) 4.00" (10.2cm) diameter polyolefin casters (all locking), and shall have (4) non-marking grey bumpers, one at each corner.