NSCF Shelleymatic

Free-Standing Self-Contained Milk & Ice Cream Dispenser

Exterior sides shall be 20-gauge stainless steel. Top and corner supports shall be 16-gauge stainless steel, welded, ground and polished into one integral unit.

Interior

Interior shall have (2) separate compartments, one refrigerated and one freezer. Inner liners shall be water-tight and constructed of 22-gauge stainless steel with a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-inplace polyurethane insulation with a non-conductive top breaker strip.

Lid

Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles.

Lovers

(3) stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit.

Self Leveling

Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18-gauge stainless steel.

Trays

(6) anodized aluminum divider trays will be supplied per cabinet section. NOTE: See chart on back for storage capacities.

Refrigeration System

Refrigeration system shall use HFC-404A refrigerant. Refrigerator section shall be controlled by an EPR valve; the freezer section shall be controlled by a pressure control. Controls shall be located near the condensing unit. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature in the refrigerator section, and 0°F to 5°F (-18°C to -15°C) temperature in the freezer section with lids closed for storage.

Electrical

Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have a 9' (2.7m) long electrical cord and NEMA 5-15P plug.

Legs

Unit shall be mounted on 6.00" (15.2cm) high adjustable stainless steel legs.


Buy This Product Online

Owner/Instruction Manual

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

NSCF Shelleymatic

Free-Standing Self-Contained Milk & Ice Cream Dispenser

Width x Depth x Height 48" x 28" x 37"
(121.92 cm x 71.12 cm x 93.98 cm)
Weight 390 lb (176.9040 kg)
Certifications UL CUL NSF

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

UL CUL NSF

 

See Downloads for warranty info.

Casters

4.00" (10.2cm) diameter swivel casters (all locking) with corner bumpers (adds 2.50" [6.4cm] to overall length and depth and reduces overall height by 1.00" [2.5cm])

Heavy Duty Casters

Heavy-duty casters (contact factory)

Bumpers

Corner bumpers (adds 2.50" [6.4cm] to overall length and depth)

Wrap Bumpers

Wrap-around bumpers (adds 1.75" [4.4cm] to overall length and depth)

Baskets

Wire baskets (16.81" x 9.62" x 3.87" [42.7cm x 24.4cm x 9.8cm])

Laminate panels

Laminate panels

Fiberglass panels

Fiberglass panels

Lid

Lid locking device

Voltages

Special voltages (contact factory)

CT Shelleymatic

CT Shelleymatic
Mobile Cantilevered Tray and Rack Dispensers

Learn More

FT2-SN Shelleymatic

FT2-SN Shelleymatic
Mobile open frame multi-stack tray and rack dispensers

Learn More

LT Shelleymatic

LT Shelleymatic
Drop-in tray and rack dispensers

Learn More

NDF Shelleymatic

NDF Shelleymatic
Mobile Drop-Front Self-Contained Milk or Beverage Dispensers

Learn More

NSCF Shelleymatic

NSCF Shelleymatic
Free-Standing Self-Contained Milk & Ice Cream Dispenser

Learn More

T, T2

T, T2
Mobile enclosed tray and rack dispensers

Learn More

TT, TT2 Shelleymatic

TT, TT2 Shelleymatic
Mobile open frame/multi stack tray and rack dispensers

Learn More