18600PDL

Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Take your operation to the next level in pizza prep by utilizing the benefits of LiquiTec® cooling technology. Dual rail prep tables have a second, elevated rail to improve production without adding to the footprint.

For more information on what LiquiTec® can do for your operation Click Here

Upper and lower rails are mechanically cooled utilizing LiquiTec® technology with die stamped 12"x20" openings
Top is constructed of 18-gauge stainless steel
22-gauge stainless steel ends are standard
Pans and adapter bars by others
17" polyethylene cutting board is standard
Flush mount NSF-7 certified pans
High density environmentaly fiendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential polyurethane foam throughout the unit
Dart style quick change gaskets
Stainless steel removable hinged covers
On/off switch is located behind the louver
1.50" diameter hole in louver for easy access to rail on/off switch
8' long electrical cord
Environmentally friendly HFC-404A refrigerant
CE approved versions available as an option


Buy This Product Online

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

18600PDL

Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Exterior Top Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33 F (1 C) to 41 (5 C) with pans flush mounted at 86 F (29.7 C) ambient room temperature, meeting NSF 7 requirements.
Exterior Back, Bottom and Ends Unfinished galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel.
Base Interior Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed.
Door(s) 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.
Refrigeration System HFC-404A refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36 F (2 C) to 40 F (4 C). On/off switches for rail and base are located behind the louvered panel. A 1.50" diameter hole is on the louver for easy access to rail on/off switch
Electrical Connections 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug.
Casters Equipment is mounted on 4" (10cm) diameter casters.
Certifications UL CUL NSF CE

18648PDL

48" Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Width x Depth x Height 48" x 311/2" x 5335/64"
(121.92 cm x 80.01 cm x 136 cm)
Weight 691 lb (313.4376 kg)
Power Output 10.1  Amps
Certifications UL CUL NSF CE

18672PDL

72" Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Width x Depth x Height 72" x 311/2" x 5335/64"
(182.88 cm x 80.01 cm x 136 cm)
Weight 873 lb (395.9928 kg)
Power Output 12.7  Amps
Certifications UL CUL NSF CE

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

UL CUL NSF CE

 

See Downloads for warranty info.

Stainless steel back
Laminate facing (full front)
Laminate end
Laminate back
Tray racks
Remote refrigeration
Variable cutting board types and sizes
Cheese grates with removable catch pans
6" (15cm) legs or casters
27" wide refrigerated drawers (2) high, holds 6" deep pans
Door/drawer locks
Adapter bars and pans
220V/50 cycle electrical system
Additional shelf

18600PDL

18600PDL
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Learn More

F18PD48

F18PD48
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Learn More

F18PD72

F18PD72
Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Learn More