Brochure or Sell Sheet
Owner/Instruction Manual
Specification Sheet
Warranty
Please Note : You may require Adobe Acrobat Reader to view these documents.
F18PD72
Self-Contained Refrigerated Pizza Prep Table with Flush Mount LiquiTec Raised Rail
| Width x Depth x Height | 72"
x 311/2"
x 5535/64"
(182.88 cm x 80.01 cm x 141.09 cm) |
| Weight | 873 lb (395.9928 kg) |
| Power Output | 12.7 Amps |
| Exterior Top | Constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33ËÂÂÂF (1ËÂÂÂC) to 41ËÂÂÂF (5ËÂÂÂC) with pans flush mounted at 86ËÂÂÂF (29.7ËÂÂÂC) ambient room temperature, meeting NSF 7 requirements. |
| Exterior Back, Bottom and Ends | Unfinished galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel. |
| Base Interior | Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed. |
| Door(s) | 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. |
| Refrigeration System | HFC-404A refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36ËšF (2ËšC) to 40ËšF (4ËšC). On/off switches for rail and base are located behind the louvered panel. A 1.50" diameter hole is on the louver for easy access to rail on/off switch |
| Electrical Connections | 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug. |
| Legs | Equipment is mounted on 6" (15.24cm) legs. |
| Certifications |
    |
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
