Configure your pizza prep table to meet the needs of your operation.
You need a production center that keeps your costs low, productivity high and delivers a quality product. Delfield’s pizza prep tables meet those needs with an integrated production center that promotes efficiency and production quality. In addition to our standard features, we provide a wide offering of options that allow you to configure your pizza prep table to meet your specific needs.
Product Features
Construction
Top, sides and ends are constructed of 18-gauge stainless steel
Mechanically Cooled
Units are mechanically cooled with diestamped openings to accommodate 12" x 20" hotel pans or fractional pans
Adapter
Pans and adapter bars by others
Pans
Pans are recessed 2" to provide proper cooling for NSF 7
Foam
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit
Gaskets
Dart style quick change gaskets
Covers
Stainless steel removable hinged covers
Switch
On/off switch and rail on/off is located behind the louver
Lover
Front louver is hinged for access to condensing unit and allow adequate air flow back of the unit
Please Note : You may require Adobe Acrobat Reader to view these documents.
Technical Specifications
18600PTBM
Self-Contained Refrigerated Pizza Prep Tables
Exterior Top
The exterior top is constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has a mechanically cooled refrigerated raised rail at the rear with openings to accommodate pans (provided by others). Rail interior is 22-gauge stainless steel and have 18-gauge stainless steel removable raised rail opening lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top openings maintains 33˚F(1˚C) to 41˚F(5˚C) with pans recessed 2"(5.1cm) at 86˚F ambient room temperature, meeting NSF 7 requirements.
Exterior Back and Bottom
The exterior back and bottom is constructed of 24-gauge stainless steel and the exterior ends are finished with stainless steel.
Base Interior
The base interior has a stainless steel base and bottom. The base interior sides and door frames are thermofoamed ABS. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, non ODP (Ozone Depletion Potential) , Non GWP (Global Warming Potential) polyurethane. The end of the base has a machine compartment with condensing unit installed.
Doors
The doors are constructed of 22-gauge stainless steel on the exterior front and a thermoformed ABS interior door liner.
Refrigeration System
HFC-404A refrigerant. The cabinet has a blower coil assembly with expansion valve located in the coil housing. The base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. The refrigerated base maintains a temperature of 36˚F (2˚C) to 40˚F (4˚C). Recessed on/off switches for the rail and base are located behind the louvered front panel.
Electrical Connections
The unit is wired with 115volt, 60 hertz, single phase, 3-wire, grounded 8' (2.4m) cord and plug.
Casters
The equipment is mounted on 5" (12.7cm) diameter casters with and overall height of casters being 6.13" (15.6 cm).
Delfield reserves the right to make changes to the design or specifications without prior notice.
Certifications
18648PTBM
48" Self-Contained Refrigerated Pizza Prep Tables
Width x Depth x Height
48"
x 311/2"
x 42"
(121.92 cm x 80.01 cm x 106.68 cm)
Weight
520 lb
(235.8720 kg)
Power Output
10.0
Amps
Certifications
18660PTBM
60" Self-Contained Refrigerated Pizza Prep Tables
Width x Depth x Height
60"
x 311/2"
x 42"
(152.40 cm x 80.01 cm x 106.68 cm)
Weight
580 lb
(263.0880 kg)
Power Output
12.0
Amps
Certifications
18672PTBM
72" Self-Contained Refrigerated Pizza Prep Tables
Width x Depth x Height
72"
x 311/2"
x 42"
(182.88 cm x 80.01 cm x 106.68 cm)
Weight
635 lb
(288.0360 kg)
Power Output
14
Amps
Certifications
18691PTBM
91" Self-Contained Refrigerated Pizza Prep Tables
Width x Depth x Height
91"
x 311/2"
x 42"
(231.14 cm x 80.01 cm x 106.68 cm)
Weight
770 lb
(349.2720 kg)
Power Output
14.0
Amps
Certifications
18699PTBM
99" Self-Contained Refrigerated Pizza Prep Tables
Width x Depth x Height
99"
x 311/2"
x 42"
(251.46 cm x 80.01 cm x 106.68 cm)