Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and adapter bars are provided by others. Pans are recessed .38" in the front for easy access and 3.38" in the rear for proper cooling (see cross section). Rail interior is 22-gauge stainless steel. Raised rail openings have 20-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), at 86°F ambient room temperature, meeting NSF7 requirements.
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel.
Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. End of base has a machine compartment, standard on right, with condensing unit installed.
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf.
Base has a blower coil assembly with expansion valve located behind door mullion. Base is equipped with independently controlled thermostat and solenoid valve. On/off switch for unit is located behind the hinged panel.
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit is wired with 8ÂÂ’ (2.4m) cord and plug.
Please Note : You may require Adobe Acrobat Reader to view these documents.
31.5" (80cm) Deep Remote Quick Glance Rail
Width x Depth x Height
(111.76 cm x 80.01 cm x 111.13 cm)
NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.
See Downloads for warranty info.
Stainless steel end
Stainless steel back
Laminate facing (full front)
Cutting board (Sanalite or composite)
A-(2) 19" in lieu of one doorB-(2) 27" in lieu of one doorC-(2) 32" in lieu of one doorE-(3) 19" in lieu of one doorF-(3) 27" in lieu of one doorG-(3) 32" in lieu of one doorH-(2) 24" in lieu of one doorJ-(3) 24" in lieu of one door
Self contained refrigerated work top table with backsplash