Exterior top is 18-gauge stainless steel with standard marine edges on all four sides. Corners are fully welded with smooth radii corners for easy clean out. Interior subtop is 22-gauge stainless steel. Over two inches of Polyurethane two-part foam provides insulation and rigidity.
Refrigerated base has 22 gauge stainless steel interior back and bottom with ABS thermoformed sides. Base exterior back, bottom and sides are constructed of galvanized steel.
Stainless Steel Ends
Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. (Unit is supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface.)
Units foundation is made of 14 gauge 1.50" x 3.25" thick galvanized leg rails with casters as standard. Unit comes standard with a stainless steel leg rail cover-up skin. Legs available on request.
The Full Extension Plus drawer system is independently self-sufficient without relying on the cabinet for strength. The entire drawer assembly is constructed of stainless steel. Drawer tracks are 11 gauge and track supports and cross members are 12 gauge. Rollers are made of selflubricating Delrin material and do not require any grease. Intermediate tracks are removable without tools. Drawer boxes are designed to allow easy grip of pan flanges. Stay shut feature allows drawers to remain closed on uneven floors. Drawers will accommodate 4.00" deep pans only. Slots are provided for optional adaptor bars to accommodate fractional and full size pans.
Mullion Coil Refrigeration system uses HFC-404A refrigerant, and maintains 36°F (2°C) to 40°F (4°C) interior cabinet temperature at 100°F (38°C) ambient room temperature. Both remote and self-contained models are standard with exterior digital thermometer and electric condensate evaporators. Electrical connections shall be 115 volt, 60 hertz and single phase.
THE FOLLOWING APPLIES TO F2800 SERIES (REMOTE) ONLY:
Remote models have a thermometer installed in the removable access panel, electric condensate evaporator, solenoid and thermostat. Remote models must be hard-wired at the installation site.
THE FOLLOWING APPLIES TO F2900 SERIES (SELF-CONTAINED) ONLY:
Self-contained models have a pre-wired condensing unit with hot gas condensate evaporator, a thermometer installed in the removable louver, and is supplied with an 8.0' (2.4 cm) cord and plug.