F2900C

Remote Low-Profile Refrigerated Equipment Stands

Built to Perform - Built to Last
Proven Construction

Equipment stands need to have solid cabinet construction to support the cooking equipment, while also having superior refrigeration and drawer systems to match. Delfield has all of the above and more!

Top is heavy duty stainless steel, with full perimeter marine edge

Standard stainless steel ends

Exterior drawer fronts are stainless steel

High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit

Snap-in drawer gaskets for easy removal

Mounted on casters

Base interior cabinet is cooled with mullion style coated blower coil(s) mounted between each door/drawer section for even air and temperature control

8' cord and plug supplied

Interior refrigerated base cabinet section to maintain 36° to 40° meeting NSF7

Digital thermometer

Wall-mounted bracket to prevent tipping

Full Extension Plus Drawer system

Full Extension Plus Drawer system is a complete drawer system. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans (by others). The drawer system is all stainless steel construction for maximum durability

When ordering, specify make, model and depth of cooking equipment sitting on the equipment stand

Height of surface for setting equipment is 25.50”

Environmentally friendly HFC-404A refrigerant


Buy This Product Online

Specification Sheet

Adobe Acrobat Reader
Please Note : You may require Adobe Acrobat Reader to view these documents.

F2900

Self-Contained Low-Profile Refrigerated Equipment Stands

Exterior Top Exterior top is 18-gauge stainless steel with full perimeter marine edge. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top made of 22-gauge 2BF stainless steel is made integral with the top by injecting 2.00” of high density polyurethane foam between the exterior and interior tops.
Base Refrigerated base interior back and bottom are constructed of a 22-gauge 2BF stainless steel. Exterior sides, bottom and back are made of 22-gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00” of high density polyurethane foam between the exterior and interior.

Refrigerated base fronts are made of .095” thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed of 18-gauge galvanized steel.
Ends Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. Units are supplied with wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface.
Full Extension Plus drawer system Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4“ deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” (5cm) of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
Casters Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 6” casters are mounted standard.
Refrigeration System Refrigeration system components are HFC-404A. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for very even air and temperature control.

A thermostat and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Models F2952C through F29110C protect the thermostat in a splash resistant enclosure. The digital thermometer with stainless steel guard is located in the top nosing above the machine compartment (standard on right). Interior refrigerated base cabinet will maintain 36°F to 40°F at 100°F ambient room temperature.
Electrical requirements Electrical connections are 115V-60H-1PH and supplied with an 8’ cord and plug.
Delfield reserves the right to make changes to the design or specifications without prior notice.
Certifications UL CUL NSF CE

F2936C

36.25” low-profile stand

Width x Depth x Height 361/4" x 317/64" x 2563/64"
(92.08 cm x 79 cm x 66 cm)
Weight 374 lb (169.6464 kg)
Power Output 3.8  Amps

F2952C

52.25” low-profile stand

Width x Depth x Height 521/4" x 317/64" x 2563/64"
(132.72 cm x 79 cm x 66 cm)
Weight 398 lb (180.5328 kg)
Power Output 8.0  Amps

F2956C

56.25” low-profile stand

Width x Depth x Height 561/4" x 317/64" x 2563/64"
(142.88 cm x 79 cm x 66 cm)
Weight 405 lb (183.7080 kg)
Power Output 8.0  Amps

F2962C

62.25” low-profile stand

Width x Depth x Height 621/4" x 317/64" x 2563/64"
(158.12 cm x 79 cm x 66 cm)
Weight 479 lb (217.2744 kg)
Power Output 8.0  Amps

F2975C

75.25” low-profile stand

Width x Depth x Height 751/4" x 317/64" x 2563/64"
(191.13 cm x 79 cm x 66 cm)
Weight 540 lb (244.9440 kg)
Power Output 10.0  Amps

F2980C

80.25” low-profile stand

Width x Depth x Height 801/4" x 317/64" x 2563/64"
(203.84 cm x 79 cm x 66 cm)
Weight 578 lb (262.1808 kg)
Power Output 10.0  Amps

F2987C

87.25” low-profile stand

Width x Depth x Height 871/4" x 317/64" x 2563/64"
(221.62 cm x 79 cm x 66 cm)
Weight 672 lb (304.8192 kg)
Power Output 10.0  Amps

F2999C

99.25” low-profile stand

Width x Depth x Height 991/4" x 317/64" x 2563/64"
(252.09 cm x 79 cm x 66 cm)
Weight 691 lb (240.4080 kg)
Power Output 10.0  Amps

F29110C

110.25” low-profile stand

Width x Depth x Height 1101/4" x 317/64" x 2563/64"
(280.04 cm x 79 cm x 66 cm)
Weight 766 lb (347.4576 kg)
Power Output 12.0  Amps

NOTE: Certifications may differ with various options available for this product. Please check Technical Specifications tab for additional information.

UL CUL NSF CE

 

See Downloads for warranty info.

Locks

Drawer locks

Electrical

220 volt, 50 Hertz electrical system.
*Inclusion of this option will alter electrical specifications

Stainless steel back

Mechanical housing left side

Doors in lieu of drawers (except 32")

Plastic laminate end

Plastic laminate back

Plastic laminate front

4" casters in lieu of 6"

6.12" adjustable full stainless steel legs and bullet feet

18600BSTM

18600BSTM
Self contained refrigerated work top table with backsplash

Learn More

18600BUCM

18600BUCM
Self contained refrigerated work top table

Learn More

CTP-NB Standard

CTP-NB Standard
Countertop Refrigerated Prep Rail

Learn More

F17C

F17C
Self-Contained Refrigerated Base Equipment Stands

Learn More

F17R

F17R
Remote Refrigerated Base Equipment Stands

Learn More

F18DC

F18DC
31.5" (80cm) Deep Self-Contained Quick Glance Rail

Learn More

F18DR

F18DR
31.5" (80cm) Deep Remote Quick Glance Rail

Learn More

F18RC

F18RC
31.5" (80cm) Deep Self-Contained Refrigerated Reduced Height Rail

Learn More

F18RR

F18RR
31.5" (80cm) Deep Remote Reduced Height Rail

Learn More

F18WC

F18WC
31.5" (80cm) Deep Self-Contained Refrigerated Work Tables

Learn More

F18WR

F18WR
31.5" (80cm) Deep Remote Refrigerated Work Tables

Learn More

F2800

F2800
Remote Low-Profile Refrigerated Equipment Stands

Learn More

F2900C

F2900C
Remote Low-Profile Refrigerated Equipment Stands

Learn More

ST4048

ST4048
Self-contained compact work top refrigerators

Learn More