CONTENTSTART

F18PD72P

Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Take your operation to the next level in pizza prep by utilizing the benefits of LiquiTec® cooling
technology. Dual rail prep tables have a second, elevated rail to improve production without
adding to the footprint.

For more information on what LiquiTec® can do for your operation Click Here

Macro Values (These are set programatically in the App_Code/Manitowoc/Classes/Manitowoc.cs under ProductHelpers.SetProductMacros()
ProductNodeAliasPath: /Products-Parts-and-Accessories/Products/Delfield/Fabrication/Refrigerator-Freezer-Bases/Prep-Tables/F18PD72
ValidVariantIDs: 74486
ValidSkuIDs: 74499
DocAssetList: qwiqr|dnxqo|ksqoov|xxmoo|rmfqs|apmir|ofpfc|swohk|efecj|cqteq
ImgAssetList: qpukjs
VidAssetList:
Features: /Products-Parts-and-Accessories/Products/Delfield/Fabrication/Refrigerator-Freezer-Bases/Prep-Tables/F18PD72/%
Categories: dualrailpreptables|metalfabrications
Attributes:
Brands: del
Related Products:
Related Variants:
Related Skus:
DisplayFeatures: True
DisplayTechSpecs: True
DisplayAccessories: True
  • Base Interior
    • Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed.
  • Door(s)
    • 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.
  • Electrical Connections
    • 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug.
  • Exterior Back, Bottom and Ends
    • Unfinished galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel.
  • Exterior Top
    • Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans flush mounted at 86°F (29.7°C) ambient room temperature, meeting NSF 7 requirements.
  • Legs
    • Equipment is mounted on 6" (15.24cm) legs.
  • Refrigeration System
    • R290 refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36°F (2°C) to 40°F (4°C). On/off switches for rail and base are located behind the louvered panel. A 2" diameter hole is on the louver for easy access to rail on/off switch
F18PD72P
F18 Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails
W x D x H 72" x 311/2" x 553/4"
182.9cm x 80cm x 141.6cm
Weight 873 lb
396 kg
Power Output N/A
Power Input Type Electric
Primary Power Input 115-120 V x 60 Hz x 1 PH
Energy Use 12.7 Amps
Certifications CULNSFUL
230V/50 cycle electrical
*Inclusion of this option will alter the electrical specifications
Celsius readout for electronic control
Remote refrigeration (contact factory)
Temp control viewing lens on mechanical housing
Stainless steel back
Casters
Casters
27" wide refrigerated drawers (2) high, holds 6" deep pans
Variable cutting board types and sizes
Stainless steel end(s)
Laminate Back
Laminate End
Laminate facing (full front)
Locks
Tray Rack for 18" x 26" pans

Brochure & Sell Sheets

EcoMark Fabrication Brochure

Pizza Prep Table

Diagram

Refrigerated Dual Rail

Installation Guide

DMLINEUP

Owner Instruction Manual

DM18

Parts Catalog List

F18 Series Work Tables Parts List

Specification Sheets

F18PDP - Self-Contained Refrigerated Dual Rail Prep Table with Flush Mount LiquiTec® Raised Rails

Warranty

1 Year Parts and Labor Warranty

CONTENTEND

Convotherm Software Updates

We are pleased to provide you the latest software updates of the Convotherm range.

Please just agree our terms and conditions of licence and use for using the software.

I noticed the terms and conditions of licence and agree


Please note:

The particular software update for Convotherm 4 gas units has to be done by an authorised service partner (there are adjustment steps necessary).

Please ensure that only software which is suitable for the unit series is installed on your Convotherm unit. This software cannot be used for other unit types from the range. If this is disregarded, no liability will be assumed for malfunctions.

Convotherm Service manuals

This section is available for authorized service partner only.

Some files are protected with a password. If you need the password please get in contact with our After Sales Service: con.kundendienst@manitowoc.com

We use cookies to ensure you get the best user experience and to continuously improve our website. Learn more
ACKNOWLEDGED