You are here:
SKU: N8768N

N8768N

Narrow Drop-In Individually Controlled Electric Food Wells

Description

Wet and dry operation
Must be hard wired in the field
Top is constructed of 18-gauge stainless steel
Flush mounted die stamped drawn 12” x 20” individual 20-gauge wells
Wells to be depressed slightly into the top to hold in condensation
Standard 1/2” stainless steel drain(s)
Non-marring press fit top gasket is supplied standard
11.87” x 19.87” individual hot food wells
Models with drains are manifolded together standard to one main gate valve
Unit shall be insulated on all sides with 1” of fiberglass and bottom to have 2” of fiberfrax blanket insulation
Individual infinite temperature controls standard wired to one main control panel with 4’ of conduit and wire. Field install control panel at location
Galvanized exterior body
Exterior
Top shall be one-piece 18-gauge stainless steel, with 0.63” overhang around perimeter and die stamped 19.87” x 11.87” (50.5cm x 30cm) openings with depressed edges. Formed well below each opening shall be 6.25” (16cm) deep. Each well shall have an individual infinite control and 1000 watt heating element attached to bottom of well. Exterior housing shall be 20-gauge galvanized steel. Unit shall be insulated on sides and between wells with 1.00” (2.5cm) fiberglass; bottom shall have 1.00” (2.5cm) blanket insulation.
Controls
Unit shall have all individual controls wired to a control panel for mounting in counter or at a remote location; 4’ (1.2 m) length of wiring and conduit are provided. Unit shall have a three-wire electrical junction box to allow hard-wiring at installation.
Drains
Models with drains are manifolded together standard to one main gate valve.

Additional information

Weight

287 lb

Power Input Type

Electric

W x D x H

67 23/32" x 15 3/4" x 9 1/16"

Primary Power Input

208-240 V x 60 Hz x 1 PH

Adapter plates and bars
Telescoping covers
Single or Double service flip up sneezeguards
220 volt, 50 cycle electrical system
Inclusion of this option will alter the electrical specifications of the unit.