You are here:
  1. Home
  2. All Products
  3. Serving
  4. KCSC-EF Shelleyglas
SKU: KCSC-EF

KCSC-EF Shelleyglas

Mobile Self-Contained Cold Pan Serving Counters

Exterior Body is seamless, one-piece molded fiberglass, having perfectly smooth exterior surface with all corners fully rounded. The fiberglass reinforced polyester (F.R.P.) is molded with permanent color. Stress points are internally reinforced.

Product Documents

Downloads

Description

Exterior Top
is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
Casters
Units are mounted on 5″ (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6″ (15.2cm).
The LiquiTec cold pan
has 2-6 die stamped 19.87″ x 11.87″ (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25″ (15.9cm) deep with .5″ drain mainfold to gate valve. Each well, flush with the top, for flush mount pans to accommodate12″ x 20″ (30.5cm x 50.8cm) pans 4″ (7.6cm) or 6″ (15.2cm) deep, supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room temperature, meeting NSF7 requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation.
Refrigeration
Uses R290 refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermeticallysealed condensing unit with adjustable cold pan pressure control. Unit is wired with a 3-wire, grounded, maximum 10′ (3m) cord and plug. Unit has an on/off switch mounted on the exterior.

Additional information

Power Input Type

Electric
Weight

350 lb
Primary Power Input

115-120 V x 60 Hz x 1 PH
W x D x H

36" x 30" x 36"

B
12″ (30.5cm) wide stainless steel fold-down tray slide
C
10″ (25.4cm) wide three-bar fold-down tray slide
E
10″ (25.4cm) wide s/s fold-down work shelf
F
Line-up interlock device
G
Glass-front counter protector
H
Two tier display with glass shelves and sneezeguards
HD
Dual service two tier display with sneeze guards
U
14″ x 30″ (35.6cm x 76.2cm) stainless steel end drop shelf
UU
Molded fiberglass trim strips
V
6″ (15.2cm) high adjustable stainless steel legs in lieu of casters

You may also like

EcoMark F18MC60EP

EcoMark F18MC60EP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18MC52DP

EcoMark F18MC52DP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18MC52AP

EcoMark F18MC52AP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18SC60CP

EcoMark F18SC60CP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC52DP

EcoMark F18SC52DP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC60AP

EcoMark F18SC60AP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC39BP

EcoMark F18SC39BP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F17DD

EcoMark F17DD

Dry Drawer Equipment Stands Top is constructed of 18-gauge stainless steel, with integral front marine edge nosing and rear backsplash. Spline bars are made of 12-gauge stainless steel and run front to back on both the left and right stainless steel sides for support and spline purposes. Two pieces of 14-gauge U-channel are welded and glued with Construction adhesive to the under side of the top for strength and sound deadening. As a standard, 14-gauge cutting board brackets are attached to each side and house a 1.25" thick x 9.5" deep maple cutting board.
EcoMark F16SD60

EcoMark F16SD60

31.5" (80cm) Deep Self-Contained Freezer Base Work Tables Exterior Top is constructed of one piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing on front and 4" (10.2cm) high by 2" (5.1cm) thick backsplash on rear. Top is insulated with 2" (5.1cm) high density insulation.
EcoMark F16SD

EcoMark F16SD

31.5" (80cm) Deep Self-Contained Freezer Base Work Tables Exterior Top is constructed of one piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing on front and 4" (10.2cm) high by 2" (5.1cm) thick backsplash on rear. Top is insulated with 2" (5.1cm) high density insulation.
EcoMark F18FC43P

EcoMark F18FC43P

31.5" (80cm) Deep Self-Contained Freezer Base Work Tables Exterior Top is constructed of one piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing on front and 4" (10.2cm) high by 2" (5.1cm) thick backsplash on rear. Top is insulated with 2" (5.1cm) high density insulation.