You are here:
  1. Home
  2. All Products
  3. Serving
  4. Shelley
  5. Shelleysteel
  6. Refrigerated
  7. SCSC-B Shelleysteel
SKU: SCSC-B

SCSC-B Shelleysteel

Mobile Self-Contained Cold Pan Serving Counters

is constructed of 18-gauge stainless steel side panels and 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place. All body cutouts are reinforced with 14-gauge galvanized channel supports.

Product Documents

Downloads

Description

Exterior Top
is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has two die-stamped openings and is provided with hinged removable lids. Lids are constructed of stainless steel and have a rubber gasket seal.
Casters
Units are mounted on 5″ (12.7cm) diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly is 6″ (15.2cm).
Refrigerated Cold Pan
is 7″ (17.8cm) deep and constructed of stainless steel built to accommodate a 4″ deep pan. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides and bottom of the cold pan and is fully insulated with foamed in place polyurethane insulation. Cold pan is equipped with a 1″ (2.5cm) I.P.S. drain with a drain valve located at the bottom of the unit. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 3″ (7.6cm) at 86°F ambient room temperature. Pans rest on a stainless steel bracket.
Refrigeration System
Uses R290 refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan temperature control. Unit is wired with a 3-wire, grounded, maximum 10′ (3m) cord and plug. Unit has an on/off switch for the cold pan mounted on the exterior.

Additional information

Power Input Type

Electric
Primary Power Input

115-120 V x 60 Hz x 1 PH
W x D x H

36" x 30" x 36"
Weight

350 lb

B
12″ (30.5cm) wide stainless steel fold-down tray slide
C
10″ (25.4cm) wide three-bar fold-down tray slide
D
10″ (25.4cm) wide composite fold-down cutting boards
E
10″ (25.4cm) wide stainless steel fold-down work shelf
F
Line-up interlock device
G
Glass-front counter protector
H
Two tier display with glass shelves and sneezeguards
HD
Dual service two tier display with sneeze guards
I
Three tier display with glass shelves and sneezeguards
J
12″ (30.5cm) wide 18-gauge stainless steel overshelf

You may also like

EcoMark F18MC60FP

EcoMark F18MC60FP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18MC60DP

EcoMark F18MC60DP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18MC52DP

EcoMark F18MC52DP

31.5" (80cm) Deep Self-Contained Mega Top Salad Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements.
EcoMark F18SC60DP

EcoMark F18SC60DP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC60BP

EcoMark F18SC60BP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC52CP

EcoMark F18SC52CP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F18SC52AP

EcoMark F18SC52AP

31.5" (80cm) Deep Self-Contained Refrigerated Salad Top Tables Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 3" (7.6cm), or 2" (5.1cm) and rest on adjustable pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm), at 86°F ambient room temperature, meeting NSF7 requirements. Unit has a stainless steel plate shelf 8.4" [21.3cm] above the doors.
EcoMark F16SD

EcoMark F16SD

31.5" (80cm) Deep Self-Contained Freezer Base Work Tables Exterior Top is constructed of one piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing on front and 4" (10.2cm) high by 2" (5.1cm) thick backsplash on rear. Top is insulated with 2" (5.1cm) high density insulation.
EcoMark F18FC62P

EcoMark F18FC62P

31.5" (80cm) Deep Self-Contained Freezer Base Work Tables Exterior Top is constructed of one piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing on front and 4" (10.2cm) high by 2" (5.1cm) thick backsplash on rear. Top is insulated with 2" (5.1cm) high density insulation.
EcoMark F17FCP

EcoMark F17FCP

Top is constructed of 18-gauge stainless steel, with integral front marine edge nosing and rear backsplash. Spline bars are made of 12- gauge stainless steel and run front to back on both the left and right stainless steel sides for support and spline purposes. Interior sub-top made of 22 gauge 2BF stainless steel is made integral with the top by injecting 2.00" of high density polyurethane foam between the exterior and interior tops. As a standard 14-gauge cutting board brackets are attached to each side and house a 1.25" thick x 9.5" deep maple cutting board.
KFW-NU FlexiWell ShellyGlas

KFW-NU FlexiWell ShellyGlas

Mobile hot and cold combination serving counters

Individually controlled hot/cold/freeze combination wells for optimizing your operation and saving space. Future proof your operation with the ability to serve what you want, when you want it. Even if your menu is set today, who knows what tomorrow will bring.